Updated November 2026
Learning how to use a conventional fishing reel comes down to five things: spooling it correctly, setting the drag, thumbing the spool during the cast, managing the retrieve, and keeping the reel clean and tuned. Once you understand how these parts work together, a conventional reel becomes one of the most controllable and powerful tools you can carry, especially for bottom fishing, heavy lures and larger fish. This guide walks through each step in order so you can go from unboxing to landing a fish with fewer tangles and more confidence.
What You Need Before You Start
A conventional reel sits on top of the rod, with the spool running parallel to the rod blank. That layout is different from a spinning reel, so the basics feel unfamiliar at first. Gather these items before you head to the water or set up at the kitchen table:
- A conventional reel matched to your rod’s rated line and lure weight
- Monofilament, fluorocarbon or braided line rated for the species you plan to target
- A pair of pliers or a line cutter
- A bucket or a bathtub filled with a few inches of water, for checking drag and practicing casts
- A practice weight, such as a 1-ounce sinker or a bell sinker, for casting practice
- A soft cloth and a small amount of reel oil or reel-safe lubricant
If you are still choosing between reel styles, the overview in Types of Fishing Reels: Spinning, Baitcasting, Spincast and Conventional explains where conventional reels fit. If you are deciding between a conventional reel and a baitcaster for a specific job, Conventional Fishing Reel vs Baitcasting: Which Should You Choose? covers the tradeoffs.
Step 1: Understand the Parts of the Reel
Before you touch the line, get familiar with the major components. Most conventional reels share the same basic anatomy:
- Spool: The part that holds the line. It rotates freely when you cast.
- Handle: Turns the gears and retrieves line. Many models have a removable handle that can be swapped to the other side.
- Drag knob or star drag: Controls how much line the spool gives up under pressure from a fish.
- Anti-reverse switch: Stops the handle from spinning backward during a hookset or when a fish runs.
- Level wind mechanism: On many conventional reels, a guide moves side to side to lay line evenly on the spool. Some models omit it, which is common on lever drag reels used for heavy offshore work.
- Clicker or ratchet: Makes a sound when line is being pulled out, alerting you to a strike.
- Thumb bar or spool release: Lets you control the spool during casting.
Spend a few minutes turning the handle, pressing the anti-reverse switch and feeling how the spool spins. This familiarity will make the next steps easier.
Step 2: Spool the Reel Correctly
Proper spooling prevents twists, helps line lay flat, and makes casting more predictable. Follow this sequence:
- Tie the line to the spool arbor with an arbor knot or a simple overhand knot with several wraps, and seat it firmly.
- Place the spool of line on a pencil or dowel, or use a line spool holder, so it spins freely as you wind.
- Keep steady pressure on the line with your fingers or a rag as you turn the handle. Tension should feel firm but not tight.
- Fill the spool to about one-eighth inch below the lip. Overfilling causes line to jump off during casts. Underfilling reduces casting distance.
- Check that the line lays flat and parallel. If it bunches or crosses, stop, back up and rewind that section.
Matching Line Capacity to the Reel
Every reel lists a line capacity for specific line weights. Using line that is too thick reduces the amount of line the spool can hold and can strain the drag. Refer to the manufacturer’s rating and stay within it. If you need help interpreting those numbers, Understanding Conventional Reel Line Capacity and Uses breaks it down.
Step 3: Set the Drag
The drag determines how much force a fish must overcome before line peels off the spool. Set it wrong and you will either lose fish to a line break or lose line to a fast run.
- Tie on your lure or rig and pull out about 20 to 30 yards of line.
- Hold the rod and pull steadily on the line with your hand. It should feel firm, and the spool should begin to give slightly at about one-third of your line’s breaking strength.
- Adjust the star drag or lever drag until that point is reached. For many freshwater species, a setting around 20 to 25 percent of line strength works well. Manufacturers specify maximum drag for each reel, so stay under that figure.
- Tighten the drag slightly for larger fish or heavier line, and loosen it for small fish or light tackle.
Check drag before every trip, because line diameter, temperature and friction change its feel.
Step 4: Learn the Basic Cast
Casting is where most beginners struggle, mainly because the spool can overrun and create backlash. Practice with the sinker in your bucket or a safe open area.
- Hold the rod in front of you with the reel on top. Place your thumb firmly on the spool, or on the thumb bar if your reel has one.
- Press the spool release or disengage the gears according to your reel’s design.
- Bring the rod back over your shoulder, letting the weight of the sinker pull the line. Keep your thumb pressed lightly on the spool.
- As you bring the rod forward, lift your thumb slightly to let the line release. Use your thumb to slow the spool as the sinker nears the target. Think of it as braking gently rather than stopping abruptly.
- Stop the rod tip at about 10 o’clock, and let the lure land. Press your thumb back onto the spool to stop it.
Thumbing Technique
Your thumb is the brake. Start with light pressure and increase it as the lure slows. If you feel the spool rotating faster than the lure is traveling, press harder. Practice on a short cast first, then increase distance as you get comfortable.
For a more detailed walk-through of the cast itself, see How to Cast a Conventional Fishing Reel: A Step-by-Step Guide for Beginners.
Step 5: Retrieve and Manage the Line
After the lure lands, engage the handle and begin reeling. Keep a steady pace and maintain light tension. If you are using a level wind, let it guide the line across the spool. Without a level wind, turn the handle evenly and try to keep the line coming back in smooth loops.
Setting the Hook
When you feel a strike, lower the rod tip slightly, then sweep it upward with a firm but controlled motion. Conventional reels hold a lot of line and provide strong leverage, so avoid jerking too hard with light line. Use the anti-reverse switch to prevent the handle from spinning backward under load.
Fighting the Fish
Keep the rod tip up and let the drag do the work when a fish makes a strong run. Reel when the fish pauses. If the drag slips noticeably, tighten it slightly before the next run.
Step 6: Clear Backlash Safely
Backlash happens when the spool overruns and line piles into a tangled mess. Stop the cast immediately by pressing your thumb onto the spool. Then use the following method to clear it:
- Do not reel while the tangle is still loose, because that tightens the knot.
- Gently tease the loops apart with your fingers, working from the outside inward.
- If the knot is severe, cut the line above the tangle, retie and respool that section.
Step 7: Clean and Maintain the Reel After Each Trip
Water, sand and fish slime build up quickly. Rinse the reel with fresh water, dry it thoroughly, and apply a small amount of reel-safe oil to the moving parts where the manufacturer recommends. Wipe the line with a dry cloth as you retrieve it to keep grit from sticking. For a full routine, see How to Maintain a Fishing Reel.
Recommended Gear
These supplies make the learning curve smoother and help the reel perform consistently over time.
- Braided fishing line: Low stretch and thin diameter make it a good choice for conventional reels that hold a lot of line. Choose a line rating that matches your reel’s capacity.
View on Amazon - Fishing line spooling station: A holder that keeps the spool turning freely while you wind, which helps prevent twists during setup.
View on Amazon - Reel-specific lubricant: Formulated oil for fishing reels helps protect the gears and bearings after saltwater or freshwater trips.
View on Amazon - Digital fish scale: Helpful for checking drag and comparing line strength to actual load during test pulls.
View on Amazon
Common Mistakes to Avoid
- Overfilling the spool: Line that sits above the lip jumps off during casts and creates tangles.
- Setting the drag too tight: A tight drag can snap light line on the first run.
- Thumbing too hard at the start of a cast: This stops the lure abruptly and can cause the sinker to fall short.
- Reeling during backlash: Pulling on a loose tangle tightens it into a knot.
- Ignoring maintenance: Sand and salt inside the reel accelerate wear on gears and bearings.
Tips for Better Results
- Practice casting with a weight in an open area before fishing a spot with obstacles.
- Match your rod, reel and line so the setup feels balanced in your hand.
- Use a leader of fluorocarbon if you fish clear water, and check it regularly for nicks.
- Keep a small towel handy to wipe line and hands during the retrieve.
- Test your drag after changing line, because thickness affects how the spool responds.
FAQ
How do you use a conventional fishing reel for the first time?
Start by learning the parts, spooling the line evenly and setting the drag. Practice casting with a weight in an open area, using your thumb to control the spool, before you fish.
How do you stop backlash on a conventional reel?
Press your thumb firmly on the spool as soon as you notice it overrunning. Keeping your thumb lightly on the spool during the cast and braking gently near the landing point prevents most backlash.
What drag setting should I use?
A common starting point is a setting that begins to release line at about one-third of your line’s breaking strength. Adjust it for the species and line you are using, and stay under the reel’s maximum drag rating.
Is a conventional reel harder to use than a spinning reel?
It takes more practice to master casting, mainly because of thumbing. Once you develop that control, many anglers find conventional reels offer more power and accuracy for heavier fishing.
How much line should I fill on a conventional reel?
Fill the spool to about one-eighth inch below the lip. Going over that point causes line to jump during casts, while underfilling reduces casting distance.
Can I use braided line on a conventional reel?
Yes, braid is common on conventional reels because it has little stretch and a thin diameter. Make sure the line rating fits within the reel’s stated capacity and use a leader if you are fishing around abrasive structure.
How often should I clean a conventional reel?
Rinse and dry it after every saltwater trip and clean it at least once every few freshwater outings. Follow the manufacturer’s guidance for lubrication intervals.
Conclusion
Using a conventional fishing reel becomes straightforward once you understand the parts, spool the line correctly, set the drag and practice your thumbing technique. Work through each step at your own pace, and expect a few tangles while you learn. With regular practice and proper care, the reel will give you consistent control and reliable power on the water.

