Updated November 2026
Bass fishing lures drawing is a useful skill for anglers who want to sketch their own baits, plan a custom paint job, or document a lure they want to build or modify. In this guide you will learn how to block out a lure’s proportions, draw its profile and body details, add color and shading, and finish a sketch that is accurate enough to use as a reference. The method works for crankbaits, jerkbaits, soft plastics and spinnerbaits alike.
Why Drawing Bass Lures Helps Anglers
Sketching a lure forces you to look closely at its shape, lip angle, eye placement and color transitions. Many anglers who draw their baits end up understanding why certain profiles run deeper or wobble harder. A sketch is also a practical planning tool. If you plan to repaint a plastic bait or design a homemade crankbait, a clean drawing lets you test proportions on paper before you commit paint or balsa wood. For background on how lure shape affects action, see What Fishing Lures to Use for Bass: A Step-by-Step Guide for Beginners.
Shopping for one? See our guide: 5 Best Bass Assassin Fishing Lures of 2026: Picks Compared.
Tools and Supplies You Need
You do not need expensive art materials to draw a lure well. A few basic tools cover almost everything.
- A sketch pad with smooth paper, at least 8.5 by 11 inches
- An HB pencil for layout and a 2B pencil for shading
- A kneaded eraser and a hard vinyl eraser for clean edges
- A ruler and a plastic protractor for checking angles and lip placement
- A set of colored pencils or alcohol markers for color planning
- A real lure on hand as a reference, ideally with the measurements noted
If you are drawing a specific bait, keep it beside you. Photos flatten the form, and a physical lure shows how light moves across the curves.
Step-by-Step: Drawing the Basic Lure Shape
Start with proportions, not details. Most bass lures fall into a few basic silhouettes, and getting the overall outline right matters more than eyes, scales or paint.
- Measure the reference lure. Note its total length, body height at the thickest point, and the position of the eye or nose. A 4-inch crankbait, for example, usually has a body height about one-third of its length.
- Draw a centerline. Lightly sketch a horizontal line through the middle of your page. This is the axis your lure will sit on.
- Block in the body. Draw a simple rectangle or oval along the centerline using your measurements. Mark where the head begins and where the tail tapers.
- Add the head and tail taper. Round the front for a crankbait or sharpen it for a jerkbait. Taper the tail to a point or a narrower shape that matches your reference.
- Place the lip or fins. For a crankbait, draw the lip at the correct angle, usually sloping down from the nose. Use your protractor to check it. For a spinnerbait, sketch the wire frame first.
- Refine the outline. Replace straight block lines with smooth curves. Compare the outline to your reference by holding the lure beside the paper.
Checking Proportions Quickly
Use a simple comparison technique to catch mistakes early. Hold a pencil at arm’s length, close one eye, and measure the lure’s length against its height. Then do the same on your drawing. If the two ratios differ by more than a small margin, adjust before adding detail.
Adding Detail: Eyes, Lips, Scales and Hardware
Once the silhouette is accurate, add the features that make a bait look realistic. Work from large to small. Place the eye first, then the gill plate or body markings, and finish with hooks and split rings. Keep detail light in early sketches so you can correct placement without fighting heavy graphite lines.
For hardware, draw the split ring and treble hook connection points so the sketch shows how the lure will be rigged. This matters if you plan to build the lure, since hook placement changes how the bait swims. For ideas on rigging specific baits, check Fishing with Crawfish Lures: 5 Best Picks for Bass Anglers (2026).
Color Planning and Shading
Color is where many beginners lose the look of a real lure. Bass-catching baits usually follow a few patterns: a darker back, a lighter belly, and a contrasting flash line along the side.
Building a Realistic Color Scheme
- Lay down the lightest belly color first, usually white, pearl or chartreuse depending on the bait.
- Add the mid-tone side color in a band that follows the body curve.
- Darken the back with a deeper shade of the main color, blending upward toward the spine.
- Add a thin metallic or holographic accent line if the lure has one, and keep it sharp.
Shading for Depth
Light usually comes from above. Shade the underside of the body and the lower edge of the lip using the 2B pencil, pressing harder near the belly. Leave a highlight strip along the top of the back, where the lure would catch light. A few confident strokes look better than many hesitant ones.
Common Mistakes
- Drawing details before proportions. A perfect eye on a wrong-shaped body still looks off.
- Ignoring the lip angle. A few degrees of error changes how a crankbait looks and how you picture it diving.
- Using too much black. Dark outlines flatten the form. Use graphite gray for most lines and save black for the darkest shadows.
- Forgetting symmetry. Draw one side, then check the other against the centerline before finishing.
- Copying a photo without measuring. Photos distort length and height, so verify against a physical lure when possible.
Tips for Better Results
- Sketch the same lure three times, starting faster each time. Speed reduces stiffness.
- Keep a small reference notebook with lure measurements for your favorite baits.
- Test a color scheme on scrap paper before using it on the final drawing.
- If you plan to paint a real lure from your sketch, use a light pencil guide and test paint on the underside first.
Recommended gear
A few supplies make the drawing process smoother, especially for detailed shading and clean outlines.
- Staedtler Mars Lumograph pencils give consistent graphite grades for light layout lines and darker shading, which helps when you move from sketch to refined drawing. View on Amazon
- Faber-Castell Art and Graphic kneaded eraser lifts graphite without tearing the paper, useful for correcting outlines. View on Amazon
- Canson XL Mix Media sketch pad handles pencil and light marker work without buckling. View on Amazon
- Prismacolor Premier colored pencils blend well for lure color schemes and gradual shading. View on Amazon
FAQ
Do I need art training to draw bass lures?
No. Accurate lure drawing depends mostly on measuring and comparing proportions, which anyone can learn. Practice with a physical bait on the desk improves results quickly.
What is the best pencil for sketching lures?
An HB pencil works well for layout, and a 2B pencil is good for shading. Using both gives you light guidelines and darker final lines.
How do I draw the lip of a crankbait correctly?
Measure the lip angle on a real lure with a protractor, then copy that angle onto your sketch. Start the lip where it meets the nose and check it against your centerline.
Should I draw lures from photos or real baits?
Real baits are more accurate because they show true proportions and depth. Photos are fine for color reference but can distort length and height.
How long does a detailed lure drawing take?
A simple outline may take under an hour. A fully shaded, colored drawing with hardware can take several hours, depending on your speed and detail level.
Can drawings help me paint a real lure?
Yes. A sketch with color notes gives you a planning map. Test paints on a spare lure first, since paint behaves differently from pencil and marker.
Are there legal issues with copying lure designs?
Drawing a lure for personal study or planning is generally fine. If you plan to sell lures based on another company’s designs or trademarks, consult a professional about intellectual property rules.
Conclusion
Bass fishing lures drawing comes down to three things: accurate proportions, clean outlines and believable shading. Measure a real bait, block in the shape, then add detail and color in stages. Practice on a few favorite lures and your sketches will become useful references for tackle planning, custom painting or building your own baits.

